Items 21 to 31 of 31 total

per page
Page:
  1. 1
  2. 2

List  Grid 

Set Descending Direction
  1. Fargo Controls TH-7 Hour Meter

    TH-7
    8mm Digits, Battery Powered w/Pushbutton Reset

    $31.95

    Features

    • 8mm Digits
    • Battery Powered
    • Screw Terminal Connections
    • Pushbutton Reset
    Learn More
  2. Counter: Battery Powered 7 Digit LCD with Reset

    CH-7
    Counter: Battery Powered 7 Digit LCD with Reset

    $31.95

    Battery Powered Counters are panel mount counters powered by a small, lithium battery. Under standard operation, they have a life expectancy of 10 years. The front reset button can be disabled if desired. Learn More
  3. 5-Digit, low-cost, CPM = 3000cpm, no power required

    207
    5-Digit, low-cost, CPM = 3000cpm, no power required

    $Call for Price

    Out of stock

    The 207 series are usually small in size and low-cost. It has a knob reset that zeros the counter by rotating the knob. It requires NO POWER. Its shaft position is right-sided and weighs about 90g. It is also very durable. Learn More
  4. 5-Digit, low-cost, CPM = 3000cpm, no power required

    606
    5-Digit, low-cost, CPM = 3000cpm, no power required

    $Call for Price

    Out of stock

    The 606 series offers high visibility and durability. It has a push button reset and a drive shaft on both side making it ideal for many applications. It has a knob reset that zeros the counter by rotating the knob. It requires NO POWER. Its shaft position is both right-sided and left-sided. It weighs about 360g. Learn More
  5. 8-digit, 9mm, Speed: Quadrature, 2.5kHz, Self-powered

    8905DQ
    8-digit, 9mm, Speed: Quadrature, 2.5kHz, Self-powered

    $Call for Price

    Out of stock

    The 8905D series consists of a small, lithium battery powered counters with a life expectancy of 10 years and timers that are panel mount. They have a maximum response time of 10k Hz and are self-powered. They also accept AC & DC voltage inputs. The front reset button can be disabled if desired. The 8905D series are also available with programmable decimal point which allows for additional versatility. Learn More
  6. 8-digits, 9mm LCD Display, Volts: 5-110VDC+/10%, Backlight

    8905DV
    8-digits, 9mm LCD Display, Volts: 5-110VDC+/10%, Backlight

    $Call for Price

    Out of stock

    The 8905D series consists of a small, lithium battery powered counters with a life expectancy of 10 years and timers that are panel mount. They have a maximum response time of 10k Hz and are self-powered. They also accept AC & DC voltage inputs. The front reset button can be disabled if desired. The 8905D series come with programmable decimal point which allows for additional versatility. Learn More
  7. 6-Digits, Cnt Speed: 10cps, non-reset electromechanical Counter

    KE610
    6-Digits, Cnt Speed: 10cps, non-reset electromechanical Counter

    $Call for Price

    Out of stock

    The KE610 Series are non-reset electromechanical counters which are ideal for almost all counting applications. It does not lose its count during power failures or from electrical noise. These counters can be operated over a wide voltage range of DC or AC power. The KE610 are used in mail equipment, photo machines, vending machines, gaming machines, elevators, copy machines, and ticket machines. Learn More
  8. 6mm, 8mm, 6-Digit or 8-Digits, 2.6-3.4VDC, Count Speed: 10KHz

    MicroCnt I
    6mm, 8mm, 6-Digit or 8-Digits, 2.6-3.4VDC, Count Speed: 10KHz

    $Call for Price

    Out of stock

    The MicroCount I and MicroCount II series are 6 and 8-digit, totalizing, add/subtract counters that can be surface or PCB mounted. The counters are usually housed in black polystyrene, plastic. The connections are made by five or six pins.

    Applications Include:

    • Amusement Machines
    • Copiers and Printers
    • Dispensing Machines
    • Portable Equipment
    • Ticket Machines

     The MicroCount series has a high contrast LCD display and a count rate of 10KHz.

    Learn More
  9. 6mm, 4-Digits or 6-Digits, 1.5V, Count Speed: 12Hz

    MicroCnt III
    6mm, 4-Digits or 6-Digits, 1.5V, Count Speed: 12Hz

    $Call for Price

    Out of stock

    The MicroCount I and MicroCount II series are 6 and 8-digit, totalizing, add/subtract counters that can be surface or PCB mounted. The counters are usually housed in black polystyrene, plastic. The connections are made by five or six pins.

    Applications Include:

    • Amusement Machines
    • Copiers and Printers
    • Dispensing Machines
    • Portable Equipment
    • Ticket Machines

     The MicroCount series has a high contrast LCD display and a count rate of 10KHz

    Learn More
  10. 6-digits, Cnt Speed: 10kHZ, no gears needed for measurement

    PS2
    6-digits, Cnt Speed: 10kHZ, no gears needed for measurement

    $Call for Price

    Out of stock

    The PS2 Series has two versions for displaying total count or rate. The R version is a 5-digit ratemeter that requires only one pulse per unit of measure (no gears needed just one pulse per shaft revolution). Rate can be displayed in units per second, minute or hour. The T-version is a 6-digit dual input bi-directional totalizer that accepts simultaneous inputs. Each pulse input equals one count with input A counting up(adding) and input B counting down(subtracting). Other features include, EEPROM, Magnetic pickup input, etc. Learn More
  11. Rectangular Sensor, Operating Dist: 2, 4, 5mm, DC, AC, Plastic, etc

    S316x
    Rectangular Sensor, Operating Dist: 2, 4, 5mm, DC, AC, Plastic, etc

    $77.50

    These are small rectangular-shaped inductive sensors. They usually come with the following features such as short circuit and reverse polarity protection, LED function indicator, protection from the effects of immersion and so on. There are various cable lengths available upon request. Learn More

Items 21 to 31 of 31 total

per page
Page:
  1. 1
  2. 2

List  Grid 

Set Descending Direction